Accessories
Rope Light Plastic Clip 10mm to 12.5mm
Special Price $0.10 Regular Price $0.301/2" Holding clip for LED Rope Clip ZZS line
. Conveniently install any of our ZZS ropes, IP67, with these plastic clips that will be easy to install with two screws and will firmly hold the rope in any position.Learn MoreRope Light Clip 10mm to 12.5mm
Special Price $0.25 Regular Price $0.301/2" Holding pin for LED Rope Clip ZZS line.
Conveniently install any of our ZZS ropes, IP67, with these metal clips that will be easy to install with one screw and will firmly hold the rope in any position.Learn MoreEnd cap for ZZS-VTN-08007-32
Special Price $0.45 Regular Price $1.00End cap for ZZS-VTN-08007-32Learn MoreConnection Pin for single color rope light (ZZS-VTN-08007-32)
Special Price $0.85 Regular Price $1.00Connection Pin for single color rope light (ZZS-VTN-08007-32).
Learn MoreConnection Pin for multi color rope light (ZZS-RGB-08007-MC)
Special Price $0.85 Regular Price $1.00Connection Pin for multi color rope light (ZZS-VTN-08007-MC).
Learn MoreDouble connector for multi color rope light (ZZS-VTN-08007-MC)
Special Price $0.85 Regular Price $1.00Connection Pin for multi color rope light (ZZS-VTN-08007-MC).
Learn MoreConnector for single color rope light (ZZS-VTN-08007-32)
Special Price $1.25 Regular Price $2.00Connector for single color rope light (ZZS-VTN-08007-32).
Learn MoreLED Flood Light Arm Connector for FUW
Connector Arm for Flood Light FUW
. Needed to use slipfitter, direct arm, universal arm.Learn MoreInside L connector from tube to tube for ZZS-VTN-08007-32
Special Price $4.15 Regular Price $5.00Inside L connector from tube to tube for ZZS-VTN-08007-32Learn More110 AC input Power converter for single color rope ZZS-VTN-08007-32
Special Price $5.25 Regular Price $6.00110 AC input Power converter, drive 82 ft / pc for ZZS-VTN-08007-32. Learn MoreWired driver for multi color rope light (ZZS-RGB-08007-MC)
Special Price $8.25 Regular Price $10.00Remote control with driver for multi color rope light RGB (ZZS-VTN-08007-MC). The driver and remote control communicate in visual range via infrared. Learn MoreAutomatic Security Photo Sensor - Max 600W
Operating voltage: AC 110V-130V, Infrared detection controller, adopt infrared detection way to control load switch, Detection distance: 12m ;Detection range: 180*140 degree(adjustable), The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 8 seconds to 7 minutes after motion has ceased. Learn MorePHOTOCELL push & twist series 100-277V UL
This Photocell is for use with street lights, barn lights, dusk to down and any other fixture with the base for push and twist that operates 100-277VAC.
Learn MoreVoltage surge protector for LED products 5Kv Max 10Kv
Special Price $12.00 Regular Price $15.00This surge protector device is for use with any LED or electronic product. Learn MoreMounting: SLIPTFITTER 2 3/8" for SMW series.
This Slipfitter 2 3/8" adjustable bracket is for use with our Shoebox SMW series.
Learn MoreVoltage surge protector for LED products 5Kv Max 10Kv for L/N L/G and N/G
Special Price $12.50 Regular Price $15.00This surge protector provides single phase protection for line/neutral, line/ground and neutral/ground in accordance with IEEE C62.41 Category C Low Exposure. The unit was designed to meet new design requirements for luminaires using LED light engines. It offers protection for LED luminaires in a small and convenient flat form factor. The surge protector is Type 5 SPD. Also protects Electronic Fluorescent & HID ballasts as well as all other electronic products.Learn MoreMogul to Mogul Extender
Mogul Base Porcelain Socket Extenders are intended for use in an existing mogul base socket where the light bulb socket needs to be extended to accept your desired light bulb or for aesthetic reasons TransformsLight E39 E40 To E39 E40 Lamp Bulb Socket High temperature resistant, anti-burning PBT and anti-aging Practical and durable, easy to installLearn MoreLED Flood Light Mounting Slipfitter for FUW
Slipfitter mount for Flood Light FUW
. Good to be used to mount with 2 3/8" tennons.Learn MoreLED Flood Light Mounting Direct Arm for FUW
Direct mount for Flood Light FUW
. Good to be used to mount direct on square poles.Learn MoreLED Flood Light Universal Mounting Arm for FUW
Universal mount for Flood Light FUW
. Good to be used to mount direct on square poles, wood poles, walls.Learn MoreLED Flood Light Photocell Assembly for FUW
Photocell Assembly for Flood Light FUW
. Needed to use push and twist photocell.;Learn MoreProtection Single phase Type 4CA SPD for L/N L/G and N/G
Special Price $14.60 Regular Price $18.00Designed to be used in conjunction with LED Drivers and fixtures to provide an additional level of protection against powerline disturbances in industrial, commercial and residential applications where surge protection to IEEE C62.41.2 is required. It can Also protect Electronic Fluorescent & HID ballasts as well as all other electronic products. This product provides single phase protection for line/neutral, line/ground and neutral/ground and is a Type 4CA SPD for field or factory installation.Learn MoreU-Bracket for SEE Street Light Series
Special Price $15.85 Regular Price $19.00This U-bracket with swivel can be used in square or round poles, wall, etc.. Angle it as necessary. Learn MoreStreet Light Wall, Wooden Pole Trunnion Mount for SET series
Trunion mount arm for SET series
This arm can be used for mounting directly to a wall or square pole.Learn MoreStreet Light Wall, Square or Round Pole Mount for SET series
Direct Mount arm for SET series.
This mount can be used on walls, square or round pole.Learn MoreMounting: TRUNNION for SMW series
This TRUNNION Mounting is for use with our shoebox SMW series.
Learn MoreSwivel mount Photo Sensor - Max 1800W
Operating voltage: AC 110V-130V, Infrared detection controller, adopt infrared detection way to control load switch, Detection distance: 12m ;Detection range: 180*140 degree(adjustable), The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 8 seconds to 7 minutes after motion has ceased. Learn MoreMounting: Arm for Square or Round pole for STC series
This ARM fits our STC light heads for street or parking lot lighting. Good to be used in either square or round poles.The round pole adapter part can be easily removed then the arm can be used in square poles. Installation is very easy.Learn MoreMounting: Straight ARM for square pole for SMW series
Special Price $17.55 Regular Price $21.00This ARM for square pole is for use with our shoebox SMW series.
Learn MoreTrunion Mount for STX Street Lights
Enhance the versatility of your STX Street Lights with our commercial Trunion Mount. Designed specifically for the STX series, this Trunion Mount provides a secure and adjustable mounting option for your lights. With easy installation and flexible positioning, you can achieve optimal lighting angles and coverage for your commercial spaces. Upgrade your lighting system with our Trunion Mount and enjoy the convenience of versatile and customizable lighting solutions. Click below to explore our Trunion Mount and take your STX Street Lights to the next level. Illuminate your spaces with precision and efficiency.
Learn MoreMounting: ARM adaptor for Square pole for slip fitter
Use this bracket adapter to install any of our street lights with 2 3/8" slip fitter to a square pole. Using this bracket will allow to change the beam direction to a street light or parking lot light.
Learn MoreRemote Control for Microwave Motion Sensor Full Function
Special Price $19.85 Regular Price $23.00This Remote control allows the programming of Microwave Motion sensor with on/off, Daylight and dimming functions. Select with up/down arrows the spec you want to adjust. Use the left/right arrow to select the value and press OK to save. Press DISP to display the current settings for the remote. See additional information for complete instructions. Enhance convenience and efficiency with our advanced Remote Control for Microwave Motion Sensor. This cutting-edge device provides full functionality, allowing you to effortlessly control your microwave motion sensor from a distance. Easily adjust settings, sensitivity, and detection range with just a few clicks. Enjoy the convenience of remote operation. Improve security, save energy, and streamline operations with our versatile Remote Control for Microwave Motion Sensor.
Learn MoreLED Flood Light Mounting Yoke for FUW
Trunion mount for Flood Light FUW
. Good to be used to mount on walls, wooden poles, on the roof.Learn MoreMounting: Adaptor for Round pole for SMW series
Special Price $20.25 Regular Price $24.00This ARM adaptor for Round pole is for use with our shoebox SMW series.
Learn MoreMounting: Slip Fitter for STC series
This SLIP FITTER adaptor for Round pole is for use with our shoebox STC series. Learn MoreDirect Mount to Square or Round Pole for STX Street Lights
This versatile mounting solution allows for a seamless installation of STX street lights directly to square or round poles. Its sturdy construction ensures a secure and durable setup, while its compatibility with different pole types offers flexibility. Illuminate parking lots, roadways, and walkways with ease. Don't miss out on the opportunity to enhance visibility and safety in your commercial space. Upgrade your commercial outdoor lighting system with our Direct Mount for STX Street Lights. Contact us now to learn more about our Direct Mount for STX Street Lights and take the first step towards superior outdoor lighting. Illuminate with confidence and efficiency today! Learn MoreMounting:Slip Fitter arm for STX series
Mounting:Slipfitter arm for STX series. Enhance the installation flexibility of your STX series lighting fixtures with our commercial Slip Fitter arms. Designed specifically for the STX series, these Slip Fitter arms provide a secure and adjustable mounting option for your lights. With easy installation and precise positioning, you can achieve optimal lighting angles and coverage for your commercial spaces. Upgrade your lighting system with our Slip Fitter arms and enjoy the convenience of versatile and customizable lighting solutions. Click below to explore our Slip Fitter arms and take your STX series lighting to the next level.
Learn MoreMounting:Yoke mount for S8C street light fixtures
This yoke mount with swivel can be used in square poles or wall mounted.
The fixture can be positioned as necessary, but most fixtures will have a frontal beam angle of 75°, thus if angled more than 15° a portion of the light will be shined to the sky, thus reducing the light where you actually need it. Learn More





